Sign up for our Email Newsletter
facebooktwitter

 




Millennia TD-1
Twin Topology Channel Strip/DI

Sale Price: $1,889.99

Questions?
Call 978-744-2001 or email

The Millennia TD-1 preamp/direct box is a half-rack, single channel Class A recording system offering dual REAMP outputs, selectable impedances, nine outputs, fully parametric EQ, Speaker Soak , HV-3 mic preamp with 65 dB gain, nine outputs, three transformers. Twin Topology DI.

Multiple Paths, One Goal: Total Sonic Realism

  • Four distinct inputs can be optimized for any source
  • Instruments – Twin Topology® DI channel; dual-triode 12AT7 vacuum tube or discrete FET solid state
  • Microphones – discrete solid state HV-3 microphone preamplifier
  • DAW or tape outputs – Discrete solid state line level amplifier
  • Guitar power amp outputs – Speaker Soak™ technology
  • Powerful yet musical tonal shading
  • Two bands of mastering-grade NSEQ-2 parametric Eq; 20 Hz to 20 kHz center frequency, 0.4 to 4.0 Q
  • Optimized DI input for any instrument with variable 470k / 2 M / 10 M impedance
  • Nine outputs for unlimited functionality
  • Patented Re-Amp outputs with custom-designed magnetics emulate Les Paul® and Strat® pickups
  • Audiophile headphone output
  • Balanced and unbalanced monolithic outputs
  • Balanced and unbalanced discrete FET outputs
  • Microphone level output with large-geometry DIT-01 transformer: -3 dB 3 Hz – 300 kHz
  • Effortlessly musical performance at all dynamic levels
  • Input headroom >100 V, output headroom > 30 V
  • 100% effective hum removal with numerous ground lifts & isolations
  • Built for critical professional applications
  • Ultra-clean toroid power supply: internal sub-chassis
  • Gold connectors, OFC audio wiring, silver Teflon power wiring
Preamplifiers and General:  
Instrument / DI Input Amplifier
Twin Topology®		 TUBE: Selected twin triode vacuum tube amplifier (200 V)
SOLID STATE: Selected all discrete J-FET amplifier (50 V)
THD + Noise  

20 Hz - 30 kHz (35 dB Gain)

 0.0005% typical mic / line, 0.03% typical vacuum tube
Intermodulation Distortion 0.0009% typical mic / line, 0.03% typical vacuum tube

Frequency Response @ -3 dB points

 3 Hz to 300 kHz, typical. Varies with routing & topology
Maximum Balanced Line Input Level +23 dBu (+43 dBu with Pad engaged or >110 Volts rms)
Maximum DI Input Level (Both Tube & SS) +18 dBu (+26 dBu with Pad engaged or >15 Volts rms)

Maximum Output Level

 +32 dBu active balanced outputs, +26 dBu unbal outputs
Maximum System Gain 45 dB standard (65 dB with optional HV-3 mic preamp)

Input Impedance (DI)

 Switchable: 470 kilohms / 2 megohms / 10 megohms
Noise (Mic) (60 dB gain) -128 dB EIN, 150 ohm source, -130 dB EIN common
source
Noise (Line) (10 dB gain) -105 dBu
Noise (DI) (10 dB gain) -90 dBu (solid state)
Phase Error (EQ out) Less than +/- 5 degrees 50 Hz to 20 kHz
Parametric Equalizer  
Maximum Boost and Cut +/– 15 dB (21 step detent
“Q” Range Q+ 0.4 to 4.0 sweepable
Low Freq sweep Switch In: Pure Class-A Discrete J-FETs
Hi Freq sweep Switch Out: Pure Class-A Triode Tubes
Power Consumption 35 watts maximum
Power Requirements Selectable: 100-120, 200-240 V ac, 50/60 Hz
Dimensions/Shipping Weight 8.5” W x 3.5” H x 13.0” D, 20 lbs.