This Item Has Been DISCONTINUED
Millennia TD-1
The Millennia TD-1 is a half-rack, single channel Class A recording system offering dual REAMP outputs, selectable impedances, nine outputs, fully parametric EQ, Speaker Soak, HV-3 mic preamp with 65 dB gain, nine outputs, three transformers. Twin Topology DI.
Now includes fitted Cordura Gig Bag (previously $100 option)
Features
- Four distinct inputs can be optimized for any source
- Instruments – Twin Topology® DI channel; dual-triode 12AT7 vacuum tube or discrete FET solid state
- Microphones – discrete solid state HV-3 microphone preamplifier
- DAW or tape outputs – Discrete solid state line level amplifier
- Guitar power amp inputs – Speaker Soak™ technology
- Powerful yet musical tonal shading
- Two bands of mastering-grade NSEQ-2 parametric Eq; 20 Hz to 20 kHz center frequency, 0.4 to 4.0 Q
- Optimized DI input for any instrument with variable 470 k / 2 M / 10 M impedance
- Nine outputs for unlimited functionality
- Patented Re-Amp outputs with custom-designed magnetics emulate Les Paul® and Strat® pickups
- Audiophile headphone output
- Balanced and unbalanced monolithic outputs
- Balanced and unbalanced discrete FET outputs
- Microphone level output with large-geometry DIT-01 transformer: -3 dB 3 Hz – 300 kHz
- Effortlessly musical performance at all dynamic levels
- Input headroom >100 V, output headroom > 30 V
- 100% effective hum removal with numerous ground lifts & isolations
- Built for critical professional applications
- Ultra-clean toroid power supply: internal sub-chassis
- Gold connectors, OFC audio wiring, silver Teflon power wiring
Specifications
| Preamplifiers and General: |
|
Instrument / DI Input Amplifier
Twin Topology® |
TUBE: Selected twin triode vacuum tube amplifier (200 V)
SOLID STATE: Selected all discrete J-FET amplifier (50 V) |
| THD + Noise |
|
20 Hz - 30 kHz (35 dB Gain)
|
0.0005% typical mic / line, 0.03% typical vacuum tube |
| Intermodulation Distortion |
0.0009% typical mic / line, 0.03% typical vacuum tube |
|
Frequency Response @ -3 dB points
|
3 Hz to 300 kHz, typical. Varies with routing & topology |
| Maximum Balanced Line Input Level |
+23 dBu (+43 dBu with Pad engaged or >110 Volts rms) |
| Maximum DI Input Level (Both Tube & SS) |
+18 dBu (+26 dBu with Pad engaged or >15 Volts rms) |
|
Maximum Output Level
|
+32 dBu active balanced outputs, +26 dBu unbal outputs |
| Maximum System Gain |
45 dB standard (65 dB with optional HV-3 mic preamp) |
|
Input Impedance (DI)
|
Switchable: 470 kilohms / 2 megohms / 10 megohms |
| Noise (Mic) (60 dB gain) |
-128 dB EIN, 150 ohm source, -130 dB EIN common
source |
| Noise (Line) (10 dB gain) |
-105 dBu |
| Noise (DI) (10 dB gain) |
-90 dBu (solid state) |
| Phase Error (EQ out) |
Less than +/- 5 degrees 50 Hz to 20 kHz |
| Parametric Equalizer |
|
| Maximum Boost and Cut |
+/– 15 dB (21 step detent |
| “Q” Range |
Q+ 0.4 to 4.0 sweepable |
| Low Freq sweep |
Switch In: Pure Class-A Discrete J-FETs |
| Hi Freq sweep |
Switch Out: Pure Class-A Triode Tubes |
| Power Consumption |
35 watts maximum |
| Power Requirements |
Selectable: 100-120, 200-240 V ac, 50/60 Hz |
| Dimensions/Shipping Weight |
8.5” W x 3.5” H x 13.0” D, 20 lbs. |
