Quested VQ3110
1100W Enhanced Active 3-Way Reference Monitor
Priced Per Monitor
**SPECIAL ORDER**
The Quested VQ3110 is a high-end powered monitor that has been designed to deliver exceptional performance and transparency in a variety of applications. It is built upon the foundation of the V3110, which is the largest powered monitor offered by Quested.
The VQ3110 features an entirely new tweeter and a 3-inch midrange driver that have been specifically designed to work in conjunction with the 10-inch LF speaker. This results in a more cohesive and balanced sound that is free from distortion and coloration.
In addition to the new drivers, the power supply and output stage of the Class AB amplifier section have been reinforced to provide even more headroom. The amplifier configuration is a hybrid design, with a Class D providing 700w for the lows and over 400w of Class AB amplification for the mids and highs. This ensures that the VQ3110 can handle even the most demanding audio signals with ease.
The VQ3110 is suitable for a number of practical applications. It can be used as mid-field monitors in large control rooms, or as main monitors in smaller spaces. It can also be configured as part of an Atmos or immersive audio system, making it a versatile choice for any professional audio environment.
Overall, the Quested VQ3110 is a top-of-the-line powered monitor that offers exceptional performance and versatility for professional audio applications.
Features:
- Drivers: bass cone - 1 x 250 mm (10")
- Medium frequency soft dome - 1 x 76 mm (3")
- High frequency soft dome - 1 x 28 mm (1 1/8")
- Max SPL: 116.5 dB continuous pink noise at 1 m Leq 1 minute 122.5 dB per pair pink noise at 1 m Leq 1 minute
- Frequency response: 34Hz-20kHz ± 2 dB & 30Hz -6 dB Connector: XLR combo socket and 1⁄4" Jack - Impedance: 10k ohm electronically balanced
- Sensitivity: Rear-mounted 10-position rotary switch, calibrated in 2dB steps
- Minimum sensitivity +4dBu for 100dB SPL @ 1m
- Maximum sensitivity -14dBu for 100dB SPL @ 1m
- Subsonic: -3dB @ 14Hz, 24dB/oct
- Crossover points: 457 Hz, 2.6 kHz, 24 dB/oct
- LF EQ: Flat, -9dB, -6dB for cut below 100Hz, +1dB for lift below 80Hz
- Mid EQ: Flat ± 1dB for 457Hz to 2.6kHz HF EQ: Flat ± 1dB for 2.6kHz to 20kHz
- LF output power: > 700W RMS continuous (note 1)
- MF output power: > 200W RMS continuous (note 1)
- HF output power: > 200W RMS continuous (note 1)
- THD: Typ 0.03% @ 1kHz at levels up to 1dB below clip, 20Hz to 20kHz typ 0.005% @ 20W RMS 1kHz
- Hum & Noise: > -100 dB relative to the clip
- Dimensions: 380 x 600 x 360mm
- Weight: 41kg
