AEA TRP3 Two-Channel Half-Rack Mic Preamp
As the newest iteration of our classic TRP design, the TRP3 achieves unprecedented sound clarity with a combination of updated, modernized circuits and the tonal warmth so embedded in every AEA design.
While all AEA preamps share similar topology and sound, each unit differs in terms of features and form factor. The TRP3 packs a punch as a half-rack powerhouse, providing unmatched levels of clean gain and open, natural sound. Drawing on its predecessor, the TRP3 offers all the classic features of the TRP2 with the added benefit of more straightforward control markings and a responsive high-pass filter that, together, faithfully reproduce even the smallest details of microphones and other sound sources.
Equally well-equipped for ribbon, condenser and dynamic microphones, the dual-channel TRP3 delivers all the gain power of our RPQ3 in a more compact, half-rack package.
The TRP3 is housed in a portable and lightweight half-rack aluminum chassis that allows you to easily take it to remote gigs, other studios, and on the road. AEA manufactures optional racking gear for convenient use in rackmount furniture.
A single TRP3 can be easily racked with TRP3 Rack Ears. Rack two TRP3s side by side with a TRP3 Rack Shelf. These assemblies can be securely installed in any standard rack.
Features
- Two-channel, high-gain, half-rack mic preamp
- Ultra-high 68KΩ input impedance (phantom power off)
- 7 to 85 dB of gain
- 48V phantom and polarity switch
- HPF switchable -3dB at 115 Hz or 230 Hz
- External PSU
- Optional rack ears (for one unit) or rack shelf (two units) for mounting purposes
Specifications
Max Gain at 1 kHz: 85 dB
EIN (Max gain, 22 Hz to 22 KHz, unweighted):
- 130 dBu (typical), 40 Ω source
- 128 dBu (typical), 150 Ω source
Frequency Response:
- 30 dB gain: (-0.5 dB from <10 hz="" to="" 200="" khz="" li="">
- 85 dB gain: (-3 dB 9Hz to >200 kHz)
THD+N: 0.0015% (1 kHz, 22 Hz-22 kHz @30 dB Gain +4 dBu output)
XLR Output Max Level: +27 dBu into 600 Ω load
Input Impedance: 11.3 kΩ (with Phantom), 68 kΩ (no Phantom)
Output Impedance: 50 Ω
Max Input Signal Level: +20 dBu (minimum gain)
Stepped Gain Control: 12-position switch from +7 dB to +65 dB
Output Trim: Continuously variable from 0 dB to +20 dB
EQ Circuitry:
- Switchable, passive first-order high-pass filter
- Selectable frequencies (-3 dB) at either 115 Hz or 230 Hz
Input and Output XLR Polarity: Pin 2 hot
LED Signal Level Indicators:
- Green LED ≅ -20 dBu;
- Yellow LED = 0 dBu;
- Red LED ≅ +20 dBu (clipping +27 dBu)