Millennia NSEQ-4
The Millennia NSEQ-4 is a two channel four band equalizer with an all-discrete true differential Class-A input buffer-amplifier that exemplifies the highest quality sonic performance.
Full Timbral Control, Total Signal Integrity
- World's first (and only) all-discrete, true differential Class-A input buffer/amplifier.
- Selectable balanced or unbalanced input.
- The outputs are conventional 3-pin male XLR output jacks and are unbalanced. Pin 1 is chassis ground, pin 2 is signal, and pin 3 is tied to audio ground.
- Greatly improved 3rd generation FSA-03 all-discrete EQ amplifier
- Improved output stage, no muting required (as with Twin Topology)
- True hard-wire bypass when EQ not selected
- Upgraded power supply leading to improved sonic performance
- Fully parametric stereo EQ with unprecedented sonic purity & integrity
- All discrete J-FET solid state signal path
- Minimalist design: only one active stage in the audio path
- Four EQ bands: 20 Hz to 20 kHz center frequency, 0.4 to 4.0 Q
- Extremely low noise: -106 dBu
- Constructed for demanding professional applications
- Ultra-Premium components throughout
- Gold relays, connectors, switches,
- Silver Teflon power wiring
- Mogami Neglex OFC audio wiring
Options
- Detented, loggable controls
Specifications
- Q Range
Q = 0.4 to 4.0 Adjustable on middle ranges
Q = 1.0 Fixed on low & high ranges
- Maximum Output Level > + 28 dBu
- Maximum Input Level (EQ Flat)
+ 28 dBu
- Maximum Input Level (EQ Full Boost) + 17 dBu
- Frequency Response
+0 / -3 dB
sub 2 Hz to beyond 300 kHz
- Frequency Response, Stereo Deviation < .15 dB
- Noise (All EQ Stages In, Controls Flat) -106 dBu
- Maximum Boost (21 Step Detented)
+20 dB (+10 dB with range switch in)
- Maximum Cut (21 Step Detented) -20 dB (-10 dB with range switch in)
- EQ Frequencies
Low Range Switch (Centers - Peak/Shelf Selectable):
20, 34, 56, 100, 180, 270
Low Mid Sweep:
20 Hz - 220 Hz or 200 Hz - 2.2 kHz.
10X Range switch selectable.
Hi Mid Sweep:
250 Hz - 2.5 kHz or 2.5 kHz - 25 kHz.
10X Range switch selectable.
- High Range Switch (Centers - Peak/Shelf Selectable) >4.8 k, 5.8 k, 8.0 k, 10 k, 16 k, 21 k
- THD + Noise
20 Hz - 30 kHz, All EQ Bands Switched In
< .009%, typ < .003 %
- Common Mode Rejection Ratio
10 Hz - 20 KHz, 100 mV C.M.
> 60 dB, Typ > 80 dB
- Slew Rate, +27 dBu Out > 50 volts per microsecond
- Main Hard-wire Bypass Switch For Each Channel? Yes
- Peak/Shelf Selection On High & Low Range? Yes
- Hard-wire Bypass Switching On Individual EQ Bands? Yes
- Input Impedance 25 kilohms
- Minimum Output Load Impedance 50 ohms
- Recommended Load > 500 ohms
- Output Impedance 5 ohms
- EQ Amplifiers Pure Class-A Discrete J-FETs
- Power Consumption 40 watts maximum
- Power Requirements Selectable: 100-120, 200-240 V ac, 50/60 Hz
- Dimensions/Shipping Weight 19” W x 3.5” H x 12.5”, 26 lbs.