Peluso Microphones P-67
The Peluso Microphones P-67 is a Vacuum Tube Microphone that is an accurate recreation of the revered Neumann U 67.
Produced from 1960 to 1971 the legendary U-67 is a key part of the classic sound of albums of the late 60s and early 70s. The shape of the dual mesh head grille and glass EF style pentode vacuum tube are part of what enables the P-67 to very accurately achieve the sonic qualities of a U-67. The P-67's capsule has dual 34 mm gold-sputtered diaphragms. The P-67 features two switches on the microphone body. A low frequency roll-off switch decreases the low-end gain and can counter the proximity effect of close range vocals. A -10dB pad switch for lower gain can be used with close range brass, guitar cabinets, drums or other high level sources. The P-67 is a highly functional and versatile microphone. Professional engineers know the "67", ask anyone.
The P-67 is paired with the Peluso MX-56 power supply. The dual sided capsule in the P-67 enables the power supply to feature 9 polar patterns in an array from omni-directional to cardioid to figure eight.
The P-67 features our heavy-duty 8-pin screw on cable connector. The large diameter pins in the screw on connector give a tight and secure cable connection designed to perform for a lifetime of use.
Acoustically matched pairs available upon special request.
Microphone kit comes as a complete system including: P-67 Microphone in a Wood Box, Power Supply, New-style 8-Pin Screw on Cable Assembly, and a Shock Mount all packed in a Flight Case.
Technical Data
- Capsule Type: Condenser Pressure Gradient w/ 34mm capsule
- Frequency Range: 20Hz/20Khz
- Polar Pattern: 9 - Switchable from omni- to bi-directional
- Sensitivity: 18 mv/pa
- Impedance: 200 ohms
- SPL: 148 dB with 10 dB pad engaged
- Equivalent Noise: 14 dB(A)
- Tube Type: EF95 (6AK5, 6J1, 5654)
- Power Requirements: Dedicated Power Supply, 115V or 230V AC
- Size: 56mm x 205 mm
- Weight: 600 g
PELUSO MICROPHONE LAB THREE YEAR LIMITED WARRANTY
PELUSO MICROPHONE LAB warrants that each product is free from defects in material and workmanship and agrees to repair or replace any part of the product which under normal installation and use discloses such defect, provided the product is delivered through the dealer or by the purchaser to PELUSO MICROPHONE LAB intact, for examination, with all transportation charges prepaid, and provided that such examination discloses in the judgment of PELUSO MICROPHONE LAB that it is thus defective. This warranty does not extend to any parts which have been subjected to misuse, abuse, neglect, accident, incorrect wiring, improper installation, or use in violation of instructions furnished by us nor to any PELUSO MICROPHONE LAB product which may have been tampered with, altered or repaired outside of PELUSO MICROPHONE LAB Authorized Service Centers. This warranty is in lieu of all other warranties expressed or implied, and no one is authorized to assume any liability on behalf of PELUSO MICROPHONE LAB, or impose any obligation on it in connection with the sale of any product other than as outlined above. This warranty is conditioned on and becomes effective only after the purchaser returns the detachable card, properly filled out, to PELUSO MICROPHONE LAB service department within fourteen (14) days after date of delivery to purchaser.